Publicidad
Attach the VESA Mount
Warning! Ensure the Arm Assembly Hex Screw is tightened
sufficiently to support the weight of the Arm Assembly and
Monitor.
Place the Monitor screen side down on a flat, clean surface.
1.
Remove any Screws or Place Holders from the VESA
2.
Mounting Holes on the back of the Monitor.
Note: Be careful not to remove any of the Screws holding
the Monitor's Casing together.
(For Monitors with recessed VESA Mounting Holes) Align
3.
the Spacers with the VESA Mounting Holes, located on the
back of the Monitor.
Align the Screw Holes on the VESA Mount with the VESA
4.
Mounting Holes on the back of the Monitor. The VESA
Mount can support a 75 x 75 or 100 x 100 mounting pattern.
(Figure 13)
Note When attached, the Arrow on the VESA Mount
should be pointing toward the top of the Monitor.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 13
Aligning the VESA Mount with Monitor
VESA
Mount
13
Publicidad
