Publicidad
Idiomas disponibles
Idiomas disponibles
On/Off
Switch/Key
Water Reservoir
FIGURE 3
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as those dust masks
that are specifically designed to filter out
microscopic particles.
DESCRIPTION
Before attempting to use any tool, be sure
to familiarize yourself with all the operating
features and safety instructions.
KNOW YOUR SAW
Your tile saw has many built-in features
(see FIGURE 3) for fast and efficient cutting
of ceramic, porcelain, marble, slate or
limestone wall or floor tile.
PART #
DESCRIPTION
A
Stand Frame
B
Stand Tubes
C
Screws, Washers, & Nuts
D
Tray
A
F
Handle
PRODUCT SPECIFICATIONS
MOTOR
Input: 9.5 Amps
Output: 1½ -Peak HP
Rating: 120 Volts~60 Hz AC
No-load Speed: 6000 RPM
Power Cord: 6'
SAW
Blade Diameter: 7 in. (180 mm)
Blade Type: Continuous Rim Diamond Blade
Arbor Size: 5/8"
Machine Weight: 52 Lbs. (23.6 kg)
CUTTING CAPACITIES
Bevel Cut Range: 0°– 45°
Adjustable Depth of Cut: Up to 2-1/4" (5.7 cm)
Maximum Rip Cut: 24" (61 cm)
Maximum Diagonal Cut: 18" (45.7 cm)
CUTTING ACCESSORIES
Laser Guide
Adjustable Miter Guide & Rip Fence
Qty
PART #
DESCRIPTION
1
E
Frame
4
F
Motor with Arm Assembly
4
G
Hex Wrench
1
H
Allen Wrench
B
H
G
I
Blade Guard
Cutting Table
Rip/Angle
Guide
Bottom
Cord Storage
Qty
PART #
1
I
1
J
1
K
1
L
D
C
J
– 3 –
FOLDING STAND
Dimensions: 17-3/4" W x 28-3/8" L
(45 cm x 72 cm)
Stand Height: 35-1/4" or 38-1/3"
(90 cm or 97 cm)
ASSEMBLY
FOLLOW ALL
OF THE ASSEMBLY AND OPERATION
INSTRUCTIONS COMPLETELY BEFORE
CONNECTING THE SAW TO A POWER
SOURCE OR TURNING THE MOTOR ON.
IF ANY PARTS ARE
DAMAGED OR MISSING, DO NOT ATTEMPT
TO OPERATE THIS SAW. OPERATING THIS
SAW WITH DAMAGED OR MISSING PARTS
COULD RESULT IN POSSIBLE SERIOUS
PERSONAL INJURY.
ASSEMBLING THE STAND
1. Insert the 4 stand tubes (B) into the stand
frame (A). (see FIGURE 4)
FIGURE 4
2. Place the 4 screws & washers through the
pre-drilled holes (C).
3. Secure with nuts (C).
DESCRIPTION
Pin, Screws, & Nuts
Table
Blade
Rip/Angle Guide
E
K
Qty
5
1
1
1
L
Publicidad
