HYDRO-RAIN HRC-050-04-EU Manual Para El Usuario página 12

enGlisH
Using Manual operation
The manual operation mode allows you to set durations in any of the four or six
stations from 1 to 99 minutes .
• Turn the rotary dial to Auto.
• Press the Manual key. Then press Next three times. The display will show a
blinking cursor on station 1 along with - - MINS . [See Figure 12]
Figure 12: LCD Display with Manual Operation
• To set the number of minutes for watering duration, press and hold the +
key to advance to desired number of watering minutes . Use the - key to go in
reverse . Press Enter to begin watering .
• To skip a station, press next until the cursor is blinking over the station number
you wish to program . (Example: To set station 3 for five minutes, press the
manual key; then press the Next key five times to select the manual operation
mode and advance to watering for station 3; using the + or - key, set the
manual watering duration to five minutes; press Enter .) [See Figure 13]
17
Figure 13: Manual Watering Station 3 for Five Minutes
Note: After the Manual key has been pushed, if a selection is not made within
60 seconds the display returns to the time of day.
• To halt or discontinue semi-automatic or manual watering, press the Clear
key once . The controller will revert to your original automatic watering plan .
18