Accessmatic Raptor 120 Manual De Usuario página 30

STEP 1 (Figure 4)
Attach the opener head to the steel track. Assembly the 2 "U" Hanging brackets with 6mm nuts supplied.
STEP 2 (Figure 4)
Place the steel track and opener head assembly centrally on the garage oor, with the open head furthest away from the
door. Lift the front of the track up to the door bracket. Insert the pivot pin and secure it with the split pin supplied.
STEP 3 (Figure 4, Figure 5)
Lift and support the opener head (with a ladder) so it is positioned centrally and
level. Fix the opener and track on ceiling by Iron bracket A & B
WARNING
Do not allow children around the door, opener or supporting ladder serious
injury and/or damage may result from failure to follow this warning.
STEP 4 (Figure 4, Figure 6)
Connect the straight arm to the bent arm with the bolt. Position and bolt the
arms to the top edge of the door using the bolt supplied
STEP 5
Lift the garage door until the shuttle locks into the drive chain/belt.
Now, ready to program the openers.
Sectional Steel Track Assembly
2 Parts Steel Track
A: 1500mm
Opening your life
Opening your life
B: 1500mm
Sleeve
5
Raptor
RP120
Code:
Figure 5
Figure 6
Figure 7
www.accessmatic.com