Accessmatic Raptor 120 Manual De Usuario página 31

3 Parts Steel Track
C: 1000mm
1) 2-Parts Track:
As Figure 7 slide the A rail into the sleeve, slide the B rail into the sleeve.
3-Parts Track:
As Figure 8, slide the C rail into the sleeve, slide the D rail into the sleeve; slide the E rail into the sleeve.
2) Cut the plastic thread; pull the screw rod along with inner chain to the end rail position (Figure 9)
3) As Figure 10, release the nut & spring.
4) Tight the nut to the right position as shown in Figure 11, cut the plastic tape, cut the plastic thread on sprocket, then
whole rail assembled nished.
Opening your life
Opening your life
D: 1000mm
Sleeve
6
Raptor
E: 1000mm
Sleeve
www.accessmatic.com
RP120
Code:
Figure 8
Figure 9