Publicidad
Idiomas disponibles
Idiomas disponibles
Appliance part/
Recommended cleaning
surface
Stainless steel sur-
Clean using a soft, damp cloth and some
faces
washing-up liquid. Use a minimal amount
of water when cleaning to prevent water
from penetrating the appliance.
Soak burnt-on remains with a small
amount of soapy water; do not scour.
Remove heavy soiling or yellow discol-
ouration caused by heat using our stain-
less steel cleaner (item no. 00311499).
Pan supports
Carefully remove for cleaning. Soak in
the sink. Clean using a scrubbing brush
and washing-up liquid.
Clean the area around the rubber buff-
ers carefully so that they do not become
detached.
Rinse with clean water and dry before
putting them back.
You can also clean the pan supports in
the dishwasher. This may cause the pan
support to become lighter in colour. This
does not affect its usability.
Burner parts
Clean using a soft, damp cloth and some
washing-up liquid. Dry with a soft cloth.
Make sure that the openings are not
blocked.
Make sure that no small parts are lost.
Do not clean in the dishwasher.
Control knobs
Clean using a soft, damp cloth and a lit-
tle washing-up liquid; the cloth must not
be too wet. Dry with a soft cloth.
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a
cleaning gel from our online shop, from your specialist
retailer or our after-sales service (item
number 00311859). It is suitable for pan supports and
the stainless-steel recess. If necessary, let the dirt soak
overnight. Follow the instructions on the cleaning agent.
Caution!
Damage to the surface
Do not use the cleaning gel on the burner parts.
Burner discolouration
After extended use, the brass burner parts take on a
darker colour as a result of the oxidation process that
occurs naturally. The discolouration does not affect
their serviceability.
Cleaning and maintenance
en
13
Publicidad
