RECOMMENDATIONS OF USE
Warming up is necessary before any operation is made to the balance.
In TARE mode, the value of the tared object cannot exceed the rated maximum
capacity of the balance.
Calibration is necessary to ensure a reliable weighing.
Remove batteries in case the balance will not be used for a long time.
Do not mix new batteries to used batteries inside of the balance.
Anode and cathode of the batteries need to be connected properly.
Switch off the balance when it is not used.
It is suggested to turn the round platter clockwise before take it off the balance.
5. MAINTENANCE AND CLEANING
To get the best results and a higher duration of the balance it is essential
to follow the processes of use.
Note: All the processes of use mentioned below will not have any value unless
you keep a continued and careful maintenance.
•
Please follow the processes of use of this manual.
•
This manual should be available for all users of this equipment.
•
Prevent the balance from sudden movements and knocks, as well as from
direct sunlight or air flows. The balance is a precision instrument, you must
handle it carefully.
•
The balance is supplied with an adapter. It has to be plugged to an earth
connection and the socket should be handy and ready to unplug the
equipment in case of emergency.
•
Never unplug the adapter by pulling the wire, do it from the base.
•
Never use the balance in a wedged location as for example a shelf.
•
Never use sharp objects as pens, etc... to press the buttons of the control
panel; only use your fingers.
•
Never place on the pan an object heavier than the maximum capacity of the
balance, the sensor could be damaged.
•
Neither submerge the balance nor spill liquids on it.
•
When you are not using the balance for a long period of time, lock the
rechargeable battery.
•
If any liquid comes into contact with the electric parts of the balance please do
immediately disconnect it from the net and send it to the technical service, as
soon as possible, for its checking and adjustment.
20