Sharp XE-A302 Manual De Instrucciones página 44

To program the word "Clerk01" with the letter "C" being double size.
To make the letter "C" double size character
To make character size return to normal size
To toggle the characters to lower-case letters
Entering character codes with numeric keys on the keyboard
To enter a numeral, letter or symbol, enter a character code using numeric keys and press the numeric key
For the character codes, please refer to the alphanumeric character code table on the next page. Be doing this,
you can program characters other than those on the key tops.
• Double-size characters can be made by entering the character code 253 or pressing the
displayed when double-size characters entry is selected as shown in the operator display example below.
• All three digits of the character code MUST be entered (even if it starts with zero).
Operator display (Example)
Press of
:
253 065
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered are displayed here.
To program the word "SHARP" in double-size characters
253
When you press an appropriate number key (job code number) and press the
start programming with the
42
Cursor
PGM
01 W 065
: :
083 072
S H
s
key, the cash register will automatically be ready for text entry.
Wg
W
H
hijk01
Characters: Indicating double size character of "A"
Press of
:
Character code
: : :
065 082
A R
=C
01 W
=C
01
=C
01
=Clerk01
01
W
=A PGM
01 W
Number of characters
programmed
:
080
P
P
key for text entry just after you
PGM
02
PGM
02
PGM
a 02
PGM
a 08
:
.
key. "W" is
02