Thermal Printer Density; Language Selection - Sharp XE-A302 Manual De Instrucciones

(4) RS-232C start code and end code
*A-C: Start code 000-127 (default: 002)
D-F: End code 000-127 (default: 013)
(5) RS-232C time out setting
Default: 007
Key operation example

Thermal printer density

* 50 is the default setting. To make the print darker, set a larger number, and to make the print lighter, set a
smaller number.
Key operation example

Language selection

*Language: 0: English
Key operation example
When you change the language, the texts such as clerk names, logo messages and function texts
(refer to
selection must be made before programming clerk names, logo messages and function texts.
56
s
33
s
35
s @
35
s A
30
s
50
s @
50
s A
00
s
88
2: French 3: Spanish (default: English)
s @
88
A
2
page 45), which you programmed, will be reset to the default settings. The language
To set "000000"
@
*ABCDEF
@
Time out (1 to 255 sec.)
To set "0"
@ *
Printer density
(00-99)
To set "0"
@
*Language
(0, 2 or 3)
s A
s
Print
s A
Print
A
Print
A