Publicidad
Idiomas disponibles
Idiomas disponibles
Information codes
OVEN
Displayed
Possible cause
Code
There is a short in the control
C-d0
key.
C-d1
The door lock is misaligned.
This code occurs if
communication between
C-F0
the Main and Sub PBA is
interrupted.
This code occurs if
C-F2
communication between the
Main and Touch is interrupted.
The oven sensor is open when
the oven is operating.
C-20
There is a short in the Oven
sensor.
This code occurs if the internal
C-21
temperature rises abnormally
high.
The main PCB sensor is open
when the oven is operating.
C-30
There is a short in the main PCB
sensor.
Solution
Press OFF/CLEAR, and then
restart the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
Press OFF/CLEAR, and then
restart the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
Displayed
Possible cause
Code
This code occurs if the PCB
C-31
temperature rises abnormally
high.
-dC-
This code appears if the divider
is inserted or removed while the
oven is operating.
This error message appears
bAd LinE
if the power cord is installed
improperly.
Solution
Call for service.
Make sure the divider is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
If the power connection is
plugged in improperly, "bAd
LinE" appears on the display.
Reconnect the power connection
properly, and the message
disappears.
English 65
Publicidad
