Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting a TV
For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO IN jacks on this unit. If
your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL
DIGITAL IN jack on this unit.
For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD
for easy viewing when you adjust the system parameters in SET MENU. If your TV has component video input jacks,
connect the component video input jacks of your TV to the COMPONENT VIDEO OUT jacks of this unit in addition to
the composite video connection. Once the component video connection is made, you can enjoy images with better
resolution.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 21).
Note
If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals
input at the TV/STB OPTICAL DIGITAL IN jack take priority over the analog audio signals input at the TV/STB AUDIO IN jacks.
Video
input
Video
OSD video pin cable
Component video pin cable
COMPONENT
TV/STB
VIDEO OUT
AUDIO IN
R
L
Component
Analog
video input
audio
output
TV
Rear panel of this unit
DVD
AUX 2
COAXIAL
OPTICAL
TV/STB
AUX 1
AUX 1
DIGITAL IN
Optical
digital
output
Audio
Audio pin cable
Optical cable
Connections
23
En
Publicidad
