Kohler K-4709 Guia De Instalacion página 11

GFCI-Protected
Receptacle
Supply Stop
7. Installation Checkout
Wrap the toilet seat with plastic wrap to prevent water from
spraying from the toilet during testing.
Plug in the power cord.
Attach the clips evenly along the hose and power cord.
When the seat is plugged in, the seat will go through a power-up
sequence where the wands will extend and retract, and the power
indicator LED will flash amber then green.
The seat is activated by skin-to-seat contact. Unless otherwise
stated, the seat must be occupied to activate the functions. To
activate the seat controls for testing purposes, when facing the
toilet, place your hand or a damp wash cloth on the right side of
the seat approximately 1/3 from the front of the seat (as
illustrated).
Proceed to the "Operation" section of the Homeowners Guide to
test the various seat functions.
Kohler Co. 11 1054180-2-E