Bluetooth®
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the current
call and held call
Adjust the phone volume*1
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes*2
*1 This adjustment will not affect the volume of the other sources.
*2 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
On the faceplate
Press
or the volume knob.
Press and hold
or the volume knob.
Press and hold
or the volume knob.
Press
.
Turn the volume knob during a call.
Press
during a call.
.
[MIC GAIN]
[LEVEL –10] to [LEVEL +10] ([LEVEL –04]): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
[ECHO CANCEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
[SETTINGS]
[AUTO ANSWER]
[01 SEC] to [30 SEC]: Answers an incoming call automatically in the
selected time (in seconds). ; [OFF]: Cancels.
[RING ILLUMI]
[BLINK 01] to [BLINK 05] ([BLINK 02]): Selects the blinking pattern
for the buttons as notification when there is an incoming call. ;
[OFF]: Cancels.
Default: [XX]
.
Default: [XX]
15
ENGLISH