Make A Call - JVC KD-X372BT Manual De Instrucciones

Bluetooth®

Make a call

You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1
Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
to the other phone.
"(Second device name)" appears.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
[RECENT CALL] (Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone number.
• "<" indicates call received, ">" indicates call made, "M" indicates call
missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the volume knob to call.
[PHONEBOOK] (Applicable only if the phone supports PBAP.)
1 Press 2 J / 1 K to select the desired letter (A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to
call.
• For using phonebook with this unit, make sure to allow access or transfer
from your smartphone. Depending on the connected phone, the process
may be different.
• This unit can display only non-accent letters. (Accent letters such as "Ú" are
showns as "U".)
16
ENGLISH
[DIAL NUMBER] 1 Turn the volume knob to select a number (0 to 9) or character
[VOICE]
again to switch
1
2
.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1
2
3
4
To erase a contact from the preset memory, select [DIAL NUMBER] in step 2,
store a blank number in step 3 and proceed to step 4.
( , #, +).
2 Press S / T to move the entry position.
Repeat step 1 and step 2 until you finish entering the phone number.
3 Press the volume knob to call.
Speak the name of the contact you want to call or the voice command to
control the phone functions. (See also "Make a call using voice recognition".)
Make a call using voice recognition
Press and hold to activate the voice recognition of the
connected phone.
Speak the name of the contact you want to call or the voice command
to control the phone functions.
Press to enter Bluetooth mode.
Turn the volume knob to select [RECENT CALL], [PHONEBOOK] or
[DIAL NUMBER], then press the knob.
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.