Holex 421721 Manual Del Usuario página 20

HOLEX Digital outside micrometer with offset measuring surfaces
de
1. General instructions
Read the instructions for use, follow them and keep them available for later reference.
bg
1.1. SYMBOLS AND MEANS OF REPRESENTATION
da
Warning symbols
CAUTION
en
2. Safety
fi 2.1. GROUPED SAFETY MESSAGES
CAUTION
fr Leaking electrolyte
Eye and skin irritation due to leaking, toxic and corrosive electrolyte.
▶ Avoid contact with your eyes and body.
▶ In the event of contact, rinse out the affected area immediately with plenty of water and consult a doctor.
it
2.2. INTENDED USE
 Outside micrometer for digital and analogue reading.
hr
 For both industrial and private use.
 Use it only in accordance with the technical data.
 Use only when it is technically in good condition and safe to operate.
lt
2.3. REASONABLY FORESEEABLE MISUSE
 Avoid vibration, abrupt movement, shaking, impacts.
nl
 Do not use in explosion hazard areas.
 Do not expose to strong magnetic fields or high voltage environments.
 Do not expose the work lamp to intense heat, direct sunlight or naked flames.
no
 Open the casing only at the battery cover to change the batteries.
 Do not make any unauthorised modifications.
3. Transport
pl
Transport in the original packaging at temperatures between -10°C and +60°C. Prevent from falling.
4. Device overview
pt
4.1. OUTSIDE MICROMETER
A
ro
1 Stirrup 2 Anvil with stepped measuring surface 3 Measuring spindle with stepped measuring surface 4 Clamping
lever 5 Button "ON/OFF - SET" 6 Button "ABS/INC - UNIT" 7 Scale sleeve 8 Scale drum 9 Friction ratchet 10 Quick adjust-
ment 11 Battery cover (back) 12 Adjustment hole (back) 13
sv
sions of the remote measuring surface
4.2. DISPLAY
sk
B
Digital display:
1 Low battery voltage 2 Measuring mode "Absolute" 3 Measuring mode "Incremental" 4 Zero point adjustment 5 Di-
sl
gital measured value 6 Display measuring unit
Analogue display:
es
7 0.01 mm - scale on scale drum 8 Scale for full millimetres on scale sleeve 9 Bezugslinie 10 Skala für halbe Millimeter auf
Skalenhülse 11 Reading edge
4.3. SCOPE OF SUPPLY
cs
 1x Outside micrometer
 For measuring range from 25 mm: 1x setting gauge
 1x Adjustment tool
hu
20
Meaning
Indicates a hazard which if not avoided may lead to minor or moderate injury.
Lorem ipsum
LCD display 14 Insulating plate 15 Adjustment tool 16 Dimen-