Publicidad
Idiomas disponibles
Idiomas disponibles
The chain brake is also activated by
the inertia of the front hand guard
if the kickback force of the saw is high
enough:
The hand guard is accelerated toward
the bar nose - even if your left hand is
not behind the hand guard, e.g. during
felling cut.
The chain brake will operate only if the
hand guard has not been modified in any
way.
Check operation of chain brake
Before starting work:
Run engine at idle speed, engage the
chain brake (push hand guard toward
bar nose). Accelerate up to full throttle
for no more than 3 seconds – the chain
must not rotate. The hand guard must be
free from dirt and move freely.
MS 360
Chain brake maintenance
The chain brake is subject to normal
wear. It is necessary to have it serviced
and maintained regularly by trained
personnel, such as your STIHL servicing
dealer, at the following intervals:
Full-time professional
users:
every 3
months
Semi-professional
users (in agriculture
and construction):
every 6
months
Hobby and
occasional users:
every 12
months
Winter Operation
At temperatures below +10°C
Preheat the carburetor
:
Turn twist lock above rear handle
90° counterclockwise.
:
Lift off the carburetor box cover
vertically.
english
33
Publicidad
