Publicidad
Idiomas disponibles
Idiomas disponibles
english
To reduce the risk of fire and burn
injury, use only spark plugs
authorized by STIHL. Always press
spark plug boot (2) snugly onto
spark plug boot (1) of the proper
size. (Note: If boot has detachable
SAE adapter nut, it must be
attached.) A loose connection
between spark plug boot and
ignition wire connector in the boot
may create arcing that could ignite
combustible fumes and cause a fire.
46
Replacing Starter Rope
and Rewind Spring
2
1
4
:
Remove the screws (1).
:
Push the hand guard up.
:
Pull underside of fan housing away
from crankcase and remove it
downward.
:
Use screwdriver or suitable pliers to
carefully remove spring clip (2) from
the starter post.
:
Carefully remove the rope rotor
with washer (3) and pawls (4). Take
care not to pull the rewind spring
(behind the rotor) out of the housing
during this process.
1
1
1
1
3
4
5
:
Use a screwdriver to pry the rope
out of the starter grip.
:
Remove remaining rope from the
rotor and grip.
Thread the new rope (see
"Specifications") through the top of
the grip and the rope bush (5).
:
Thread the rope through the rotor
and secure it with a simple
overhand knot.
:
Coat rope rotor bearing bore with
non-resinous oil.
:
Slip rotor over starter post – turn it
back and forth to engage anchor
loop of rewind spring.
MS 360
Publicidad
