Fuel tank run until completely dry
After refueling, press the manual
N
fuel pump bulb at least five times –
even if the bulb is already filled with
fuel.
Set the choke knob to suit the
N
engine temperature.
Now start the engine.
N
HT 56 C
Transporting the Unit
The unit features a split drive tube that
helps save space during transportation.
Disconnecting the Drive Tube
Disconnect the shoulder strap from
N
the carrying ring.
Place the unit on the ground:
N
3
2
1
Loosen the star knob (1) – do not
N
remove it.
Pull the drive tube (2) out of the
N
coupling sleeve (3).
Fit the cap (4) on the end of the
N
drive tube.
NOTICE
Make sure the ends of the drive tube are
clean.
Connecting the Drive Tube
Pull the cap off the drive tube and
N
keep it in a safe place.
Put the powerhead on the ground so
N
that it rests on the machine support.
Examine ends of drive tube for dirt
N
and clean if necessary.
6
2
Slide the lug (5) on the front drive
N
tube (2) into the slot (6) in the
coupling sleeve as far as stop – if
necessary, turn the front drive
tube (2) back and forth while
pushing it home.
English
4
5
25