WARNING
CRITICAL
TRANSPORTATION AND
SITE WARNINGS
• When transporting and
installing the appliance,
care should be taken to
ensure that no parts of
the refrigerant circuit are
damaged.
• R-600a or R-134a is used as
a refrigerant.
Check the compressor label
on the rear of the appliance
or the rating label inside the
refrigerator to see which
refrigerant is used in your
refrigerator.
WARNING
CRITICAL INSTALLATION
WARNINGS
• Do not install this
appliance near a heater
or flammable material.
• Do not spray flammable gas
near the refrigerator.
- There is a risk of explosion or
fire.
• Do not install this appliance
in a humid, oily or dusty
location, or in a location
04_ safety information
DA68-02935A-10.indb 4
exposed to direct sunlight or
water (rain drops).
- Exposure can cause
insulation to deteriorate.
Deteriorated insulation on
electrical parts may cause
electric shock or fire.
• Do not place this refrigerator
in direct sunlight or expose to
the heat from stoves, room
heaters, or other appliances.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should
always be plugged into its
own individual electrical
outlet which has a voltage
rating that matches the
voltage on the rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock or fire.
• Do not use a cord that
shows cracks or abrasion
damage along its length or at
either end.
2018. 7. 9.
4:53