Brake Pedal; Drive Pedal - Sabo 92-13 H B Manual Del Operador

CONTROLS AND INSTRUMENTS

4.31 BRAKE PEDAL

This pedal works the brake on the rear
wheels.

4.32 DRIVE PEDAL

This pedal engages drive in the wheels
and controls the machine's forward
and reverse speeds.
– To engage forward drive, press it
towards «F» with your toe-cap. As
you increase the pressure on the
pedal, the speed of the machine
increases.
– Reverse is engaged by pressing the
pedal with the heel towards «R».
– The pedal automatically goes into
neutral «N» when released.
WARNING!
!
reverse when the machine has
stopped moving
NOTE
engine stops as soon as the parking brake (4.4) is engaged.
4.33 HYDROSTATIC TRANSMISSION DISENGAGEMENT LEVER
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all uses, when moving and during cutting;
«B» = Transmission disengaged: this makes it much easier to move the machine
by hand, with the engine turned off.
IMPORTANT
carried out only when the engine has stopped with the pedal (4.32) on position «N».
Only shift into
If the drive pedal is used, whether forwards or for reverse, the
To avoid damage to the transmission unit, this operation must be
4.31
4.32
N
R
4.33
A
15
EN
F
B