Resetting To Factory Defaults - Philips LFH9160 Manual Del Usuario

numbers, you should use 21 for an FTP
server, 22 for an SFTP connection and 80 for
an HTTP Web server.
If your server requires authentication to
7
download the firmware file, enter the name
of the user account, the password, and
confirm the password. Otherwise leave
the ,
USERNAME PASSWORD
text fields empty.
PASSWORD
Enter the full path and file name to the .bcd
8
file of the new firmware into the
text field.
SERVER
Press the
9
UPGRADE NOW
the upgrade process.
D Note
Once the firmware upgrade is complete, the
LAN Docking Station will restart. You may get
disconnected from the configuration interface.
User manual

4.11 Resetting to factory defaults

Follow these steps to reset the LAN Docking
Station to its factory default configuration
settings:
B
Docking Station, all your configuration settings
and will be lost.
CONFIRM
1
PATH ON
button to start
2
3
4
5
6
7
Warning: When you reset the LAN
Make sure that the LAN Docking Station is
connected to the main power supply using
the Philips power supply.
Slide a Digital pocket Memo 9600 or 9620
into the docking slot of the LAN Docking
Station.
Press and hold the
FUNCTION
button on the Digital Pocket Memo
MENU
simultaneously for 3 seconds.
The configuration settings of the LAN
Docking Station will reset to their factory
defaults, and the LAN Docking Station will
restart. The IP address of the LAN Docking
Station will be set to 192.168.109.1 (subnet
mask 255.255.255.0).
Open the LAN Docking Station
configuration interface by entering its IP
address in your Web browser.
You will be prompted to enter a user name
and a password. Leave the user name field
empty and enter ‚administrator' in the
field.
PASSWORD
Change the IP address of the LAN Docking
Station according to your network policy.
See Changing the IP address of the LAN
Docking Station on page 13 for more
information.
and the
17