Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
accept secure connections, you may use this
feature by checking the
For further information, refer to
on page 11. For information on setting up
the FTP server, refer to chapter
the FTP server
on page 10.
6
AUTOMATIC FILE UPLOAD SETTINGS
The automatic file upload settings let
you configure which dictation files are
automatically uploaded to the FTP server
when a Digital Pocket Memo is connected
to the LAN Docking Station. For further
information, refer to
page 12.
7
ADMINISTRATION PASSWORD
Enter an administration password for the
LAN Docking Station.
8
COMMENTS
You may enter any commentary data about
the LAN Docking Station in the comments
panel. For further information, see
a comment to the LAN Docking Station
page 16.
Press the
9
CONFIGURE
of the Initial Setup Installer panel to submit
the settings to the LAN Docking Station.
5.7
Changing the settings of multiple
LAN Docking Stations
The Administration Tool allows for quick
reconfiguration of the most important settings
of one or multiple LAN Docking Stations.
Configure FTP settings, administration
1
password, DHCP activation and automatic
22
radio button.
SFTP
FTP settings
Setting up
Automatic file upload
on
Assigning
on
button at the bottom
file upload settings in the global settings
form, which is located below the
Administration Tool's main pane.
Select the LAN Docking Stations you want
2
to update.
Click the
3
SUBMIT CHANGES
bottom right corner. An overview of the
settings is displayed. These settings will be
sent to the LAN Docking Stations after
confirmation by clicking the
The result of the operation of each LAN
Docking Station is shown in a result
window. Clicking the
close the overview, but will keep the new
settings stored for later submission. Upon
clicking the
UNDO CHANGES
stored settings will be deleted.
D Note
Settings can only be uploaded to LAN Docking
Stations that are currently online.
5.8
Changing the settings of a single
LAN Docking Station
Many of the settings of the LAN Docking
Station can be changed directly in the data
record in the Administration Tool's main pane.
These are:
•
A flag indicates wether the LAN Docking
Station is configured via a DHCP server (or
not) in the DHCP column.
•
A flag indicates if the LAN Docking Station
connects to an FTP or an SFTP server (for file
upload) in the USE SFTP column.
button in the
button.
OK
button will
CANCEL
button, any
User manual
Publicidad
Tabla de contenido
