Operator responsibility
Operator responsibility
Make sure all persons tasked with operating, installing, and maintaining the unit
have read and understand the safety information and operating instructions.
Set up, maintenance, repair
Only qualified personnel is authorized to perform configuration, installation,
maintenance and repairs of the thermostat.
Appropriate operation:
Routine operation can also be carried out by untrained personnel who should
however be instructed by trained personnel.
The personnel operating the units should be regularly instructed about the dangers
involved with their job activities as well as measures to avert these dangers.
When using hazardous materials or materials that could become hazardous, the
circulator may be operated only by persons who are absolutely familiar with these
materials and the circulator. These persons must be fully aware of possible risks.
Handling
Make sure the product is checked for proper condition regularly (depending on the
conditions of use).
Regularly check (at least every 2 years) the proper condition of the mandatory,
warning, prohibition and safety labels.
Make sure that the mains power supply has low impedance to avoid any negative
effects on instruments being operated on the same mains.
Magnetic radiation may affect other devices with components sensitive to magnetic
fields (e.g., monitors). We recommend maintaining a minimum distance of 1 m.
Do not expose the unit to sunlight.
55