Skil 3540 Instrucciones De Funcionamiento Y Seguridad página 11

SM 2610028638 12-14_3540 12/23/14 9:01 AM Page 11
Disconnect the plug from the power
W RNING
source before making any adjustments
or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Tile Blade installation
To reduce the risk of injury, do not use
W RNING
tile blade larger or smaller than 7"
diamter, do not use tile blade with speed rating less
than 3600 Rpm. only use smooth edge tile blade free of
openings and grooves.
1. Remove the lower guard by using a number 2 screwdriver
(not provided) to loosen the two securing screws (Fig. 1).
2. Hold the tile saw blade firmly by hand, then loosen the nut
with nut wrench in a counterclockwise direction (Fig. 2).
3. Remove outer flange and the tile blade.
4. Ensure that the shaft and the flanges are clean.
5. Ensure that the directional arrow marked on the new tile
blade is counterclockwise with the shaft. (Fig. 3). Ensure
the outer flange is aligned with the shaft.
6. Install the new tile blade by reversing the steps required
to remove the tile blade. DO NOT OVERTIGHTEN.
7. Ensure the tile blade is secure before using.
assembly and adjustments
11.
FIG. 1
lower
Guard
Screw
FIG. 2
Remove
install
FIG. 3
Tile
Blade
Nut
outer
flange
Tile Blade Direction
Screw
wrench
Shaft