Titan M-4 Manual De Usuario página 11

Adjusting the Packing Seal Assembly
i
There is a hole in the cap (1). If coating medium is discharged
from this hole, the packing requires adjustment
1. Unscrew the cap (1) with a flat head screw driver, then remove the
spring (2).
2. Use box spanner 10 mm socket wrench to turn the pressure plate a
quarter turn to the right.
3. Replace the spring (2) and tighten the cap (1) as far as the stop.
If the problem persists, please consult your Titan service center.
M-4/M-8 GB
2
3
1
11