Titan M-4 Manual De Usuario página 9

Cleanup
A well-cleaned airless gun is essential for a satisfactory level of operational
quality. Flush the gun after each use and store in a dry location. Do not leave
the gun or any of its parts in water or solvents.
Special cleanup instructions for use with flammable solvents:
• Always flush spray gun preferably outside and at least one hose length
from spray pump.
• If collecting flushed solvents in a 1 gallon (4 litre ) metal container, place
it into an empty 5 gallon (20 litre) container, then flush solvents.
• Area must be free of flammable vapors and well ventilated.
• Follow all cleanup instructions.
The spray device, the hose and the airless gun have to be
cleaned thoroughly after using, as otherwise the paint
that was used can accumulate and considerably impair the
performance of the device.
Attention
Always spray at the lowest possible pressure when the tip and
tip guard have been removed. To clean the airless gun, hose
and spray device, use only water or a suitable solvent.
M-4/M-8 GB
9