Publicidad
Idiomas disponibles
Idiomas disponibles
18
Adjusting Ground Coffee Amount
Dispensed by the Coffee Grinder
You can adjust the ground coffee dispenser
(8) to obtain a SMALL MEASURE (minimum
5g.) up to a LARGE MEASURE (maximum 12
g.) as follows:
To obtain a SMALLER Measure:
a) Stop the coffee grinder using the ON/
OFF switch (11).
b) Remove the ground coffee dispenser lid (7).
c) Turn the ground coffee screw (9) TO THE
RIGHT.
d) Replace the ground coffee dispenser lid (7).
To obtain a LARGER Measure:
a) Stop the coffee grinder using the ON/
OFF switch (11).
b) Remove the ground coffee screw (9) TO
THE LEFT.
d) Replace the ground coffee dispenser lid (7).
19
Maximum Operating Time
The coffee grinder SHOULD NOT
BE OPERATED CONTINUOSLY FOR
MORE THAN 30 MINUTES.
If you observe any abnormal
operation, turn off the coffee grinder, unplug it
immediately from the mains outlet, and con-
tact Technical Service or your dealer.
48
20
Cleaning Precautions
It is very important to regularly clean the
coffee grinder's different parts.
To avoid any incidents, you should clean
the machine with the indicated frequency
following these SAFETY GUIDELINES:
a) Before cleaning any part of the coffee
grinder (even the outer shell) make sure
you turn it off using the on/off switch (11)
and unplug the coffee grinder from the
mains outlet.
b) Never clean the coffee grinder using
running water or submerging it in water.
c) Never use abrasive cleaners or chemical
solvents.
21
Cleaning the Hopper
Frequency: Every 25 days.
a) Unplug the grinder using ON/OFF switch (11).
b) Loosen the lockscrews (3) which fasten
the hopper to the adjusment platen (4) and
remove the hopper (2).
c) Clean the hopper using a highly diluted
solution of dishwasher liquid in water.
Always wash the hopper by hand, never
place in the dishwasher.
d) Make sure the hopper is completely dry be-
fore re-attaching it and locking the screws (3).
22
Cleaning the Grinding Blades
Frequency: Every 25 days.
Use a round brush with semi-rigid bristles.
The brush should be long enough to reach
all parts. Try to use a brush exclusively for
cleaning the coffee grinder and store it in a
clean, dry space.
a) Unplug the grinder using the ON/OFF
switch (11).
b) Loosen the lockscrews (3) and remove the
hopper (2).
c) Press the adjust-
ment trigger (6) and
keep it pressed to
free the adjustment
platen (4) and turn
the platen TOWARDS
THE LEFT, in the direc-
tion of the "G" arrow,
until you remove the
platen.
d) Clean the grinding
teeth and all other
elements in the hou-
sing using the brush,
completely dry and
without
using
any
type of liquid.
e) Replace the ad-
justment platen (4)
and turn it TOWARDS
THE RIGHT, in the
direction of the "F"
arrow, until reaching
the grinding position
you want. (See sec-
tion 17 for coffee grin-
ding thickness adjustment).
23
Cleaning the Dispenser
Frequency: Every 25 days.
Use the same brush for cleaning the grin-
ding blades.
a) Unplug the grinder using the ON/OFF
switch (11).
b) Move the dispenser handle (14) back and
forth as many times as needed to empty the
dispenser (8).
c) Remove the dispenser lid (7).
d) Use the brush, completely dry and wi-
thout using any type of liquid, to clean the
inner surface of the dispenser (8).
Move the dispenser handle (14) back and
forth to clean thoroughly.
e) Replace the dispenser lid (7).
24
Cleaning the outer Body of the
Coffe Grinder
If the outside of the coffee grinder becomes
dirty, clean it with a soft cloth dampened
in water. Remember to turn off the grinder
using the On/Off switch (11) and unplug it
before cleaning.
Cleaning of the interior of the coffee grin-
der should be perfomed ONLY BY TECHNICAL
SERVICE STAFF.
EN
49
Publicidad
