Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before assembling this tool, make sure all parts are present. Compare parts
with package contents list. If any part is missing or damaged, do not attempt
to assemble the tool.
Estimated Assembly Time: 1 – 3 minutes
Tools and Materials Required for Assembly:
• 9/16 in. (14 mm) or adjustable wrench (not included)
• Thread sealant tape
• Tool oil (not included)
• Male plug
ASSEMBLY INSTRUCTIONS
1/2-IN IMPACT WRENCH
1. Remove plastic air inlet protective cap
from air inlet (E1) (See Figure 1).
2. Insert the male plug into the air inlet (E1).
Tighten the male plug (I) by turning it
clockwise using a 9/16 in. (14 mm)
wrench (not included) for an air tight
connection. DO NOT OVERTIGHTEN.
(See Figure 2).
NOTE:
Use threaded sealant tape
on the threading of the male plug (I).
1
2
13
E1
Publicidad
