Kobalt SGY-AIR292 Manual Del Usuario página 18

ASSEMBLY INSTRUCTIONS
3. Place 2 – 3 drops of air tool oil
(not included) into the opening of the
male air plug (I) before each use
(See Figure 3).
NOTE: Use a mineral-based or synthetic air
tool oil in your pneumatic air tool.
Failure to use air tool oil will cause damage
to the tool and void the warranty.
4. Insert chisel (R) into the opening of
cylinder (B3) (See Figure 4).
5. Screw the spring retainer (K) onto the
cylinder (B3) by turning it clockwise until
firmly secured (See Figure 5).
NOTE: Use the top hook on the spring
retainer to help screw the spring onto
the cylinder (B3).
3
4
R
5
K
Top hook
Clockwise
18
B3
B3
I
Bottom hook