Publicidad
Idiomas disponibles
Idiomas disponibles
COMPRESSOR REQUIREMENTS
AIR HAMMER
5.8
90
@
SCFM
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
IMPORTANT: To operate correctly, this tool requires airflow of at least 5.8 Standard
Cubic Feet per Minute (SCFM) at 90 Pounds per Square Inch (PSI) at the tool. The air
hose length could affect how much air pressure the tool is actually receiving. You may
need to adjust the air pressure higher on the air regulator to achieve the working
pressure of 90 PSI.
PRODUCT SPECIFICATIONS
1/2-IN 350 FT-LB IMPACT WRENCH
COMPONENT
DRIVE
FREE SPEED
MAXIMUM TORQUE
AVERAGE AIR CONSUMPTION
AIR INLET
AIR HOSE
WORKING PRESSURE
3/8-IN 50 FT-LB AIR RATCHET
COMPONENT
DRIVE
FREE SPEED (RPM)
MAXIMUM TORQUE
AVERAGE AIR CONSUMPTION
AIR INLET
AIR HOSE
WORKING PRESSURE
SPECIFICATIONS
1/2 IN.
7,000 RPM
350 FT.-LBS.
7.8 SCFM
1/4 IN. NPT
3/8 IN.
90 PSI
SPECIFICATIONS
3/8 IN.
180 RPM
50 FT.-LBS.
7.4 SCFM
1/4 IN. NPT
3/8 IN.
90 PSI
3
Publicidad
