Premium PBS653H Manual De Uso Y Cuidado página 5

5. INSTRUCTIONS FOR THE INSTALLER
The following operation requires building and/or carpentry work so
must be carried out by a competent tradesman.
Installation can be carried out on various materials such as
masonry， metal， solid wood or plastic laminated wood， as long as they
are heat-resistant (T90℃)
5.1 Attachment to support structure，traditional built-in model
Create an opening with the dimensions shown in the Figure 1 or refer
to the table-board cutting template in the carton in the work surface,
observing a minimum distance of 50mm from the rear edge. This
appliance can be installed next to walls that are higher than the work
surface, as long as the distance "X" is kept between the appliance and
the wall, as shown in the figure, to avoid damage from overheating.
Make sure there is a minimum of 750mm between the gas rings and
any shelf that may be installed directly above them ( figure 2).
Figure 1
4