Montipower MBX ULTIMATE ELECTRIC Manual De Instrucciones página 13

®
MBX ULTIMATE ELECTRIC
7. Use
7.1 Setting speed
The rotating speed is preset and fixed at 2,300 rpm to ensure optimal performance.
The VTC electronics make material-compatible work possible and an almost constant
speed, even under load.
7.2 Switching On and Off
Always guide the machine with both hands.
Switch on first, then guide the accessory towards the workpiece.
The machine must not be allowed to draw in additional dust and shavings. When
switching the machine on and off, keep it away from dust deposits. After switching off
the machine, only place it down when the motor has come to a standstill.
7.3 Working instructions
Press down lightly on the machine
and move over the surface by making
oscillating movements.
Correct direction of operation.
EN
13