Publicidad
Idiomas disponibles
Idiomas disponibles
®
MBX
ULTIMATE ELECTRIC
Reducing dust exposure:
WARNING
MontiPower
to cause cancer, birth defects or other reproductive harm. Examples of such
chemicals could include:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies depending on the surfaces being treated and
how often you do this type of work. To reduce your exposure to chemicals work in a well
ventilated area and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
This also applies to dust from other materials such as some timber types (like oak or
beech dust), metals and asbestos. It may also lead to allergic reactions and respiratory
disease. Do not let dust enter the body.
Observe the relevant guidelines and national regulations for your material, staff,
application and place of application (e.g. occupational health and safety regulations,
disposal).
Collect the particles generated at the source and avoid deposits in the surrounding
area. Use suitable accessories for special work to ensure fewer particles enter the
environment in an uncontrolled manner.
Reduce dust exposure with the following measures:
• do not direct the escaping particles and the exhaust air stream at yourself or nearby
persons or on dust deposits,
• use an extraction unit and/or air purifiers,
• ensure good ventilation of the workplace and keep clean using a vacuum cleaner as
sweeping or blowing stirs up dust.
• vacuum or wash protective clothing. Do not blow, beat or brush.
– Depending on the surface to be treated, some dust created by the
®
®
MBX
surface preparation process may contain chemicals known
EN
9
Publicidad
