Descargar Imprimir esta página

Promax MC-377+ Manual De Instrucciones página 50

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTION MANUAL MC-377+.
VIDEO SIGNAL
External video input
Sensibility
Video output
SOUND
Input
Outputs
Demodulation
TV
TER
SAT
Level indication
Output power
Volume control
EXT. UNITS POWER SUPPLY
22 kHz signal
Voltage
Frequency
POWER SUPPLY
Battery
Voltage
Autonomy
Recharging time
Protections
Mains supply
Voltage
Frequency
Consumption
OPERATING ENVIRONMENTAL CONDITIONS
Altitude
Temperature margin
Max. relative humidity
Page 4
Analogue channels
Scart (automatic)
1 Vpp (75 Ω) positive video
Scart (75 Ω)
Analogue channels
Scart
Built-in speaker, Scart
Mono
According to CCIR standard or manual tuning
between 4.5 and 6.5 MHz except in the L standard
and version MC-377+/1.
Tuning between 5 and 8 MHz
Tone whose frequency varies according to signal
level
0.2 W
0/13/18V, 350 mA. Indicator of consumption higher
than 50 mA and protections against short circuits
and 50 V AC.
Selectable ON/OFF
0.6 V ± 0.2 V
22 kHz ± 4 kHz
12 V-2.6 Ah
>1 hour without external units powering (at 30%
on/off).
40 minutes approximately with external units
powering (at 30% on/off).
8 h approximately (starting from a total discharge)
Low battery indication (blinking colon on the
display).
Minimum charge automatic cut-off.
110-125-220-230/240 V AC with voltage selector
50-60 Hz
55 W
Up to 2000 m
From 5 ºC to 40 ºC
80% (up to 31 ºC),
decreasing lineally up to 50% at 40 ºC.
May 2001

Publicidad

loading