Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use the Adjustable Nozzle
You should now know how to START and STOP your
pressure washer. The information in this section will tell you
how to adjust the spray pattern and to apply pressure
washer specific detergents.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
possible amputation.
• NEVER adjust spray pattern when spraying.
• NEVER put hands in front of nozzle to adjust spray pattern.
1. Slide nozzle backward (A) to achieve high pressure.
Slide nozzle forward (B) when you wish to adjust spray
to low pressure mode.
A
2. Point nozzle down towards a firm surface and press
trigger to test pattern.
3. Twisting nozzle adjusts spray pattern from a fan pattern
(A) to a narrow pattern (B).
A
Usage Tips
• For most effective cleaning, keep spray nozzle from 8 to
24 inches (20 to 61 cm) away from cleaning surface.
• If you get spray nozzle too close, especially using high
pressure mode, you may damage surface being cleaned.
• DO NOT get closer than 6 inches (15 cm) when
cleaning tires.
How to Use the Turbo Nozzle
The turbo nozzle spins a 0° nozzle stream in a circular
pattern, providing an intense wide-spray pattern for scouring
large surface areas fast and efficient.
A turbo nozzle can easily cut through heavy oil and grease
stains on concrete, brick and plastic and strip paint from
various surfaces. DO NOT use the turbo nozzle on delicate
materials, especially wood. Always start the turbo nozzle at a
distance, gradually getting closer to the surface until you get
the cleaning force you want. Always keep the turbo nozzle in
a constant motion. NEVER dwell on a single spot. Pass over
stubborn stains repeatedly until they are gone using even
strokes.
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
B
possible amputation.
The turbo nozzle produces an extremely high
pressure spray which is capable of removing
paint and cutting holes through surfaces if held
too close.
• Always make sure the surface you will clean will not be
damaged by the high pressure spray by testing in a hidden area.
To attach the turbo nozzle to the spray gun:
1. Engage trigger lock on spray gun trigger.
2. Remove nozzle extension from spray gun, if attached.
3. Attach turbo nozzle extension to spray gun. Tighten by
hand.
4. Disengage trigger lock on spray gun trigger.
5. For most effective cleaning, keep turbo nozzle from 8 to
24 inches away from cleaning surface. If you get turbo
nozzle too close, you may damage cleaning surface.
NOTE: Detergent cannot be applied with turbo nozzle.
B
How to Use the Rotating and Utility Brushes
The rotating and utility brushes allow you to scrub surfaces
with water and pressure washer safe detergents filtering
through the bristles.
To attach a brush to the gun:
1. Remove nozzle extension from spray gun, if attached.
2. Attach brush with adapter to spray gun. Tighten by
hand.
WARNING
13
Publicidad
