Tool it PBT 812 Manual De Uso página 21

Idiomas disponibles

Operating manual

IR TEST

1. Select IR TEST from the main menu.

2. Use the clamps to connect with the battery directly.

3. Measure the battery temperature by aiming the tempera-

ture sensor to the battery

4. Once the IR test is completed, the PBT 812 will display

the voltage & internal resistance value on the result page.

5. Select DONE to return to main menu or select PRINT to

print out the IR test result.

SETTINGS

Enter SETTING from the main menu and then select the item you would like to adjust or proceed. Such as backlight,

language, date & time, customized information, and cable diagnosis. Or simply check the version of the PBT 812.

BACKLIGHT

1. Select BACKLIGHT and use directional keys to adjust the brightness of the display.

2. Press ENTER to confirm the setting and return to setting menu. Or press BACK key to discard the change and

return to the setting menu.

LANGUAGE

1. Enter LANGUAGE to select the language desired.

2. Press ENTER to confirm the setting and return to setting menu. Or press BACK key to discard the change and

return to the setting menu.

DATE & TIME

Select DATE & TIME to adjust the time.

1. Use directional keys to adjust and press ENTER to proceed to the next item.

2. Once completed, press BACK to return to the setting menu.

INFORMATION

1. Select "INFORMATION" to enable / disable, edit or erase the customized print out info.

2. Press BACK to return to the setting menu.

VERSION

1. Select "VERSION" to check the current firmware veriosn, serial number of the PBT 812.

CABLE DIAGNOSIS

1. Select "CHECK CABLE" to perform self diagnosis of the cable set.

2. An instruction will be popped up on the screen.

2-1. Clamp on a battery that the voltage is above 12.4V. And make sure its posts are clean.

2-2. Press ENTER to start

3. Select START to start the cable diagnosis and check the result.

4. Result will be shown on the Test Report, use left and right key to switch between positive/negative cable test result

explanation.

Translation of the original

instructions

PBT 812