Teufel REAL BLUE Guia De Inicio Rapido página 3

EN – 3
Pairing
1. First time use: Press and hold the power button for
Pairing Mode is entered automatically and you will see the LED fast flashing blue.
2. Enable the Bluetooth of your device to search and pair with a new device "Teufel REAL BLUE PRO", when it's
connected, the LED will solid on blue for 10 seconds.
3. Connect with a new device: With your headphone turned on, double press the power button
will flast flashing blue for Bluetooth Pairing.
Note: During Bluetooth operation with specific mobile phones, it can be possible that audio latency effects
would be audible.
ShareMe
ShareMe enables simultaneous wireless music-listening among 2 ShareMe equipped headphones. With one of
your headphone connected to Bluetooth device, please follow below steps:
1. Press the Power Button 1 and Center Button of the Joystick 7 simultaneously, the LED fast flashing purple.
2. Start ShareMe on another headphone by press the Power Button 1 and Center Button of the Joystick 7
simultaneously, when the two headphones connect, the LED solid on purple for 10 seconds.
3. Press the Power Button 1 and Center Button of the Joystick 7 simultaneously when ShareMe active to
disconnect the ShareMe.
1.5 seconds to switch on your headphones. Bluetooth
. The LED