Gastrodomus TRF8 Manual Del Usuario página 15

5 USING THE APPLIANCE
5.1 SETTING UP THE TRH12/TRH22 FOR USE
N.B before using the appliance makes sure all the components that can be removed are secured in
position (see fig 6)
- Mount the mincer outlet and lock it in place using the handle on the side of the connection.
- Mount the screw feeder, blade and disk, and then screw on the lock nut.
TRF8/TRF12 MEAT MINCER INSTALLMENT PROCEDURE:
1. install shell (fig 5) into body and install the knob into the hole of the front cover.
2. install screw feeder (fig4) into shell and make sure the placement of knob is right.
3. install knife on screw feeder and then install blade (fig 2)
4. All the components are fixed by heel cover to ensure the safety.
TRF22 MEAT MINCER INSTALLMENT PROCEDURE:
5. install shell (fig 5) into body, and install the knob into the hole of the front cover.
6. install screw feeder (fig4) into shell and make sure the placement of knob is right.
7. install knife on screw feeder and then install blade (fig 2)
8. All the components are fixed by mincer block to ensure the safety
15