Publicidad
Idiomas disponibles
Idiomas disponibles
5.2
FILLING THE MINCER (see fig 5)
When using the mincer, it is important that you stand in the correct position. Do not position
yourself so that any part of your body comes in direct contact with the mincer when working.
N.B The mincer must be filled when working. The procedure to follow is:
1. Place the food in the tray.
2. Start the mincer using the start button.
3. Raise the pestle; feed the meat into the tube;
Without forcing use the pestle to push the meat
into the opening.
4. If the meat suitably cut beforehand there should be no
problems with the screw feeder, however, if there are problems
tighten the lock nut until the meat is cut to desired size.
5. So, both the disk and blade last longer and to maintain their sharpness in time:
- When all the meat has been minced turn off the appliance.
- Blade and disk must always be coupled.
6. Do not tighten the lock nut excessively.
7. Press the stop button when you have finished using the appliance, then strip the appliance and
thoroughly clean both the opening and all other components.
6
REGULAR CLEANING
6.1
GENERALITIES
-
The appliance clean must be cleaned at least once a day or if necessary, more than once.
-
Scrupulously clean all the various components of the TRF8/TRF12/TRF22 whether they come
in direct contact with the food product or not.
-
Never clean them with a pressurized waterjet, industrial cleaner, and brushes or any other type
of cleaning utensil that could damage the surface of the appliance.
-
Before cleaning you must remove the electricity supply plug isolating the appliance from the
main power circuit.
6.2
PROCEDURE TO FOLLOW FOR CLEANING THE APPLIANCE
-
Remove the pestle and food tray.
-
Unscrew the lock nut and remove the disk: blade screw feeder, unscrew in the direction
indicated by the arrow.
-
Unscrew the knob and remove the mincer, always in the direction indicated by the arrow. Now
all the components can be washed using warm water (50 °C) and a neutral detergent. To clean
the main structure, use a damp cloth remember to frequently rinse. The grater roller mounted
on the TRF8/TRF12/TRF22 meat mincer should be brushed cleaned. Carefully clean the
punched holes. Make sure all the components are completely dry before remounting them.
7
MAINTENANCE
7.1
GENERALITIES
Before servicing the appliance, you must disconnect the electricity supply plug isolating appliance
from the main power source.
16
Publicidad
