Publicidad
Idiomas disponibles
Idiomas disponibles
7
NOTE!
Use the below specified methods of maintenance only.
The thermal imager does not comprise any parts service-
able by the user. Do not at-tempt to dismantle or modify
the camera on your own. Opening the instrument
voids the warranty.
Camera enclosure – all surfaces, except for optical elements of
the camera, can be cleaned with a soft and moist cloth with gen-
erally available mild detergents. Do not use any solvents or clean-
ing agents that could scratch the enclosure (powder, paste, etc.).
During cleaning, the camera must be turned off.
Due to the applied anti-reflective coating, optical lens are the
most sensitive and at the same time the most expensive part of
the camera (the lens is of key importance to radiometric capabili-
ties of the infrared system). Optical surfaces should be cleaned
only, when they are visibly fouled. Do not touch exposed surfaces
of optical lens with fingers, because fouling left with fingerprints
can be harmful to coatings and glass of the lens.
Chemical agents must not be used for cleaning the optics and ac-
cessories of the camera. Use a clean, dry and soft cloth.
Cleaning and maintenance
KT-120M – USER MANUAL
33
Publicidad
