Cleaning And Maintenance; Storage; Dismantling And Utilization - Sonel CMP-401 Manual De Uso

Should the test leads be left in the sockets during replace-
ment of the battery, there might be a risk of electric shock
with a dangerous voltage.
In order to replace the battery it is necessary to do the following:

remove all the test leads from the measurement sockets and
place rotational selector in the position OFF,

remove the one rear Phillips head screw,

open the battery compartment,

replace the required one 9V battery,

re-assemble the meter.
9

Cleaning and maintenance

The casing of the meter may be cleaned with a soft, damp cloth
using all-purpose detergents. Do not use any solvents or cleaning
agents which might scratch the casing (powders, pastes, etc.).
The electronic system of the meter does not require mainte-
nance.
10

Storage

In the case of storage of the device, the following recommenda-
tions must be observed:

Disconnect all the test leads from the meter,

Make sure the meter and its accessories are dry,

In the case the meter is to be stored for a prolonged period of
time, the battery must be removed from the device.

11 Dismantling and utilization

Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
50
WARNING:
CMP-401 – USER MANUAL