Dacor Serie Instrucciones De Instalación página 42

Installation instructions
10. Moving the Refrigerator Into Its Enclosure
• According to the type of cabinet, a jig (positioning aid) can be used to align the
refrigerator's custom door panel with cabinet by marking vertical line on the cabinet.
CAUTION
Make sure to position the front of chassis spacer so that it is aligned with the vertical line.
Otherwise, the installed refrigerator will tilt and its door may not close fully.
In addition, auto door open system may not work normally.
1 1/2"
(40 mm)
Panel
ready
42 English
Dacor_OneDoor_BRR9000M_IM_DA68-03621B-07_EN.indd 42
Overlay Type
chassis spacers
Product
Top view
Overlay
Frameless
Jig (positioning aid)
Frameless Type
chassis spacers
1 1/2"
(40 mm)
Panel
Product
ready
Top view
2020-11-16 4:25:19