Dacor Serie Instrucciones De Instalación página 54

Installation instructions
19. Aligning the Panel
NOTE
Each custom panel comes with 12 dedicated screws for fine-tuning. Use a minimum
number of screws to fine-tune the custom panel with the cabinet. Once fine-tuning is
complete, fix the custom panel with the top nut.
There are two panel-adjustment mechanisms at the top and two at the bottom of the door.
Adjust the panel so it aligns with the surrounding cabinetry.
The gap between the cabinet and the panel must be:
• 1/8" (3 mm) on top
• 1/8" (3 mm) on the side for single installation
• 5/32" (4 mm) on the side for pair installation
1/8" 1/8"
1/8" 1/8" 5/32" 5/32" 5/32"
Top of the Door
1. Use the double-threaded bolts to align the door panel.
2. Engage a side screw (see the graphic) to shift the panel side to side.
3. Engage Screw 1 (see the graphic) to shift the panel forward/backward; engage Screw 2
to set the panel in place.
54 English
Dacor_OneDoor_BRR9000M_IM_DA68-03621B-07_EN.indd 54 2020-11-16 4:25:22