Safety Recommendations - simatherm IH 025 VOLCANO Manual De Usuario

Safety recommendations

• The operating instructions must be followed and kept in a safe place at all
times.
• The IH 025 device generates a magnetic field. People wearing a pace-
maker, especially if it is an older model, should consult their doctor before
operating the device as it could impair the functioning of the pacemaker.
Electronic equipment such as wristwatches, memory cards, monitors and
displays, magnetic tapes, etc. may also be affected.
• Always place the device on a non-metallic surface that is stable and dry.
• Ensure that the ventilation slots are free at all times and the device can
suck in cold air on the ground.
• The device must always be connected to an AC power network with the
correct voltage as indicated on the type plate.
• Ensure that the device does not get wet and do not expose it to high hu-
midity levels.
• The device must not be immersed in water or any other liquid.
• Do not operate the device in the vicinity of heat sources and ensure that it
is placed a sufficient distance away from walls and flammable objects.
• The device must not be used in areas where there is a risk of explosion.
• Do not activate the heating process if no roller bearing or other workpiece
is in place.
• Avoid contact with hot workpieces. Wear the supplied protective glove
when handling hot workpieces.
• Please ensure that you always use a power and temperature level that is
appropriate for the workpiece in question to ensure that it is heated care-
fully and not damaged.
• The device is intended for heating roller bearings. The manufacturer ac-
cepts no liability in the event of inappropriate or incorrect usage.
• Regularly check the plug, connecting cable and heating cone for wear
and tear or damage. If you discover any damage, send the device to your
simatherm partner for inspection.
• Do not modify the device.
© simatec ag Portable Induction Heater IH 025 VOLCANO 19