EN
DANGER:
Failure to read the Owner's Manual prior to operating or servicing your American Sanders machine could result in injury to
you or to other personnel; damage to the machine or to other property could occur as well. You must have training in the
operation of this machine before using it. If you or your operator(s) cannot read English, have this manual explained fully
before attempting to operate this machine.
DANGER:
A. Sanding/finishing wood floors can create an explosive or combustible environment. Do not operate sanding machines
around solvents, thinners, alcohol, fuels, floor finishes, wood dust or any other flammable materials. Cigarette lighters, pilot
lights, electrical sparks and all other sources of ignition should be extinguished or avoided. Keep work area well ventilated.
B. Dust generated from sanding wood floors can spontaneously ignite or explode. Promptly dispose of any sanding dust in a
metal container clear of any combustibles. Do not dispose in a fire.
C. Risk of explosion. Floor sanding can result in an explosive mixture of fine dust and air. Use floor sanding machines only in
a well-ventilated area free from any flame or match.
DANGER:
Electrocution or fire could occur if the edger is being operated with a damaged power cord. Keep the power cord clear of the
edger pad and Edger Dolly wheels. Always lift the cord over the machine. Do not move the machine by the power cord.
DANGER:
To avoid injury keep hands, feet, and loose clothing away from all moving parts on the machine.
WARNING:
Injury can occur if protective clothing or equipment is not used while sanding. Always wear safety goggles, protective clothing,
and dust mask while sanding.
WARNING:
Sanding machines are not to be used on pressure treated wood. Some pressure treated woods contain arsenic and sanding
pressure treated wood produces hazardous dust. Inhaling hazardous dust from pressure treated wood can cause serious
injury or death.
WARNING:
Any alterations or modifications of this machine could result in damage to the machine or injury to the operator or other
bystanders. Alterations or modifications not authorized by the manufacturer voids any and all warranties and liabilities.
WARNING:
Do not exceed the listed weight capacity. Be aware of dynamic loading. Do not jump or fall on the dolly.
WARNING:
Assemble properly per instructions. Attach the seat and chest pad in the correct orientation.
WARNING:
Do not sit on the chest pad. Only sit on the seat cushion and lay your chest on the chest pad. Sitting on the chest pad could
cause the Edger Dolly to flip over.
WARNING:
Always hold onto the Edger Dolly as you sit down to keep it from rolling or tipping.
WARNING:
Do not over extend the chest pad during use. The maximum gap between the chest pad and the seat cushion is 5", (12,7 cm).
3