mage to the charger.
This can result in inter-
nal short circuits.
• The charger must not
be operated on or near
fl ammable surfaces
(e.g. paper, textiles).
Risk of fi re due to hea-
ting during charging.
• If the power cable for
this equipment is dama-
ged, it must be replaced
by the manufacturer, a
customer service agent
of the same or a simi-
larly qualifi ed person
in order to prevent ha-
zards.
• Do not use the charger
to charge non-recharge-
able batteries.
• To reduce the electric
shock hazard, unplug
the battery charger
from the mains before
cleaning the charger.
• Do not use any acces-
sories that are not recom-
mended by PARKSIDE.
This can result in electric
shock or fi re.
Charging Process
Do not expose the
battery to extreme
conditions such as heat or
impact. Risk of injury from
escaping electrolytic solution!
After eye/skin contact, rinse the
affected areas with water or a
neutraliser and consult a doctor.
Charge the battery
in a dry room only.
Prior to attaching the charger,
check that the battery's outer
surface is clean and dry. There
is a risk of injury due to electric
shock.
To recharge batteries of
the Parkside X 20 V Team
series, only use a
charger belonging to the
Parkside X 20 V Team
series.
• Charge the battery before the
fi rst time of use.
• Always take heed of the ap-
plicable safety instructions
as well as the environmental
GB
IE
21