Ohyama WOOZOO IHF-1201G-E Manual De Usuario página 18

Introduction for buttons on remote controller
11
CLOCK button
Press this button to set clock time. "
button within 5s to set clock time. Each pressing of "▲" or " " button, clock time will
increase or decrease 1 min, if hold "▲" or " " button, 2s later, time will change quickly.
Release this button when reaching your required time. Press "CLOCK" button to confirm the
time. " " icon stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operations can't exceeds 5s. Otherwise, remote control
ler will quit setting status. Operation for TIMER ON/TIMER OFF is the same.
12
QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display "
and "AUTO" signal ) and Quiet mode (display "
is no signal of " " displayed), after powered on, the Quiet OFF is defaulted.
Note:
● The Quiet function can be set up in all modes; Under the Quiet mode,the fan
speed is not available.
● When quiet function is selected
Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or
when indoor ambient temperature ≤28°C, indoor fan will operate at notch
2 speed or quiet mode according to the comparison between indoor ambient
temperature and set temperature.
Under heating mode: indoor fan operates at notch 3 speed or quiet mode according
to the comparison between indoor ambient temperature and set temperature.
Under dry, fan mode: indoor fan operates at quiet mode.
Under auto mode: the indoor fan operates at the auto quiet mode according to
actual cooling, heating or fan mode.
● The Quiet function is only available for some models.
13
WiFi button / X-FAN button
When WiFi function is turned on, "WiFi" icon will be displayed on the remote
controller; when WiFi function is turned off, "WiFi" icon will disappear.
How to turn on WiFi: Press "WiFi" button to turn on WiFi function.
How to turn off WiFi: Hold "WiFi" button for 5s to turn off WiFi function.
Under off status, press "MODE" and "WiFi" buttons simultaneously for 1s, WiFi
module will restore factory settings.
● This function is only available for some models.
This user manual is used for several model, and this model have X-FAN button
and X-FAN function instead of Wifi function.The actual product shall prevail.
X-FAN function : under dry or cooling mode, press this button to turn on the
X-FAN function. When the air conditioner turn off, the indoor unit will continue
to blow for a few minutes.
" icon on remote controller will blink. Press "▲" or " "
" signal) and Quiet OFF (there
15
In
14
Pre
ler
15
Pre
sta
Pre
sim
hea
hea
● T
16
"
By
tem
set
● W
o
● W
d
● W
d
No
● O
in
● It
d
● O
● W
t
t
Fu
E
Un
turn
sho
aut
Pre