Publicidad
Idiomas disponibles
Idiomas disponibles
MC-5456700-Bedien-0807
• Use power tools, accessories,
attachments, etc., in accordance
with these instructions and the
specifications for an appliance of
this particular type. Also take into
consideration the working conditions
and the work to be done. The use of
power tools for any application other
than those for which it is intended
may result in dangerous situations.
Service
• Have your appliance repaired only
by qualified specialists and only with
original spare parts. This way it is
ensured that the appliance remains
safe to use.
6 – Safety instructions
relating specifically to
the equipment
• Use the appliance, the accessories
and the charger only for their intended
applications!
• Before laying the appliance aside,
ensure that all moving parts have
come to a standstill.
• Connect the charger only to a 230 V
AC power supply.
• Charge the battery only with the
charger supplied.
• Protect from moisture. Never immerse
in water!
• Do not use the charger in the open air.
• To avoid damage to the battery, never
expose the appliance to temperatures
of over 50 °C.
02.08.2007 14:11 Uhr
charger!
and flames. Never place it on
radiators nor expose it to direct,
strong sunlight!
• Use the appliance for dry sanding
• Contact with and inhalation of sanding
• Hazard from flying sparks and
Explosion hazard!
flammable materials nearby!
• Never machine materials containing
• Attach only accessories with a Velcro
• The dust-extraction openings of sand
• When working, do not apply excessive
Seite 47
ATTENTION! Do not short-circuit
the contacts of the battery or
ATTENTION! Explosion hazard:
Keep the tool away from heat
only.
dust is harmful to the health of the
operator and persons nearby, so
always work with the dust extractor
switched on. If necessary, wear a
mask.
particles. The operator and persons
nearby should therefore wear suitable
eye protection, e.g. safety goggles.
ATTENTION! Do not throw
sanding dust into naked flames:
ATTENTION! Risk of burns from
flying sparks! Do not store
asbestos!
layer to the sanding plate.
paper sheet and sanding plate must
largely coincide.
pressure to the appliance, as this may
cause it to stop.
47
Publicidad
