Pressure Hose/Gun Connection; Pressure Hose/Washer Connection; Garden Hose Coupling/Washer Connection; Garden Hose/Washer Connection - AllTrade TRADES PRO 830271 Manual De Instrucciones

1. Remove and discard the protective plastic
plug from the gun inlet.
2. Unpack the pressure hose and connect the
hose connector to the gun inlet. Ensure that
the threads are aligned properly. Securely
tighten the connector using a 17mm wrench
(not provided).
1. Remove and discard the protective
plastic plug from the high pressure outlet.
2. Connect the pressure hose
connector to the high pressure
outlet at the lower front of the unit. Ensure
that the threads are aligned properly.
Securely tighten the connector by hand.

GARDEN HOSE COUPLING/WASHER CONNECTION

If the coupling is not attached to the pressure washer, attach the
coupling (with screen filter side facing out) to the water inlet
connector in the lower back of the pressure washer. Securely
tighten the connector by hand.
turned on. Damage to equipment resulting from failure to follow this instruction will void
warranty.
1. Before connecting the garden hose to the
Pressure Washer, connect the garden hose
to the water source and run water through
the hose to flush out any debris. Shut off
the water.
2. Attach garden hose to the pressure
washer water inlet in the lower back of the
unit. Ensure that the threads are aligned
properly. Securely tighten the nut by hand.
3. Turn on the water source.

PRESSURE HOSE/GUN CONNECTION

PRESSURE HOSE/WASHER CONNECTION

GARDEN HOSE/WASHER CONNECTION

DO NOT run the pump without the water supply connected and
WRENCH
HOSE
1
WATER
SOURCE
12
HOSE
COUPLING
GARDEN HOSE
2