Cleaning Tips; Shutting Down Pressure Washer - AllTrade TRADES PRO 830271 Manual De Instrucciones

CLEANING TIPS:

• Never leave the Pressure Washer unattended while it is plugged into an electrical outlet
and while water is supplied to the equipment.
• Never use the Pressure Washer water inlet to siphon detergent or wax.
• If you have the nozzle too far away from the surface being washed, the cleaning will not
be as effective.
IMPORTANT: DO NOT get closer than 6 inches when cleaning.
To shut off the Pressure Washer:
1. Release spray gun trigger.
2. Move unit's ON/OFF switch to OFF position.
IMPORTANT: Releasing the trigger will shut off the motor but does not shut off electrical
power to the unit.
3. Turn off water supply.
4. ALWAYS point spray gun in a safe direction and squeeze spray gun trigger to relieve built
up pressure in the unit.
and water is disconnected.
5. Engage trigger lock on spray gun when not in use.
6. Disconnect GFCI plug from outlet.
7. Loop the power cord and pressure hose and hang
on the hooks on the sides of the pressure washer.
8. Disconnect the wand from the gun and place both
in their holders on the side of the pressure washer.
9. Disconnect pressure washer from water supply and
store the unit (see MAINTENENCE section).
SHUTTING DOWN THE PRESSURE WASHER
Spray gun traps high water pressure, even when motor is stopped
17